Description

Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine.

Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. The camshaft works well with high-performance’s street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: – Duration @ .050 Intake: 234 degrees – Duration @ .050 Exhaust: 244 degrees – Lift @ Valve Intake: .488″ – Lift @ Valve Exhaust: .510″ – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees

• Designed for 1500 to 6500 RPM Performance
• Maximum Power in High-RPM with Good Low-End Torque
• Matched to Edelbrock Performer RPM Intakes
• 10 to 12 in. of Manifold Vacuum at Idle
• More Lift and Duration than Most Street Camshafts
• Includes Hydraulic Lifters and Assembly Lube
• Dyno-Matched/Street-Proven Performance
• Take the Guesswork Out of Camshaft Selection!

Application Summary: